https://www.worldometers.info/coronavirus/coronavirus-death-rate/

Western Union (ticker: WU) has made a takeover offer for MoneyGram (MGI), Bloomberg said late Monday. A purchase price was not disclosed. … “Western Union does not comment on market rumors regarding mergers and acquisitions,” the company said in a statement.Jun 2, 2020
https://www.barrons.com › articles
a

Rihanna’s job I said Liana

Democracy Dies in Darkness
Religion
This is not the end of the world, according to Christians who study the end of the world

A pedestrian crosses 13th Street NW in Washington during what would normally be rush hour on Tuesday. (Jonathan Newton/The Washington Post)
By Julie Zauzmer and Sarah Pulliam Bailey
March 17, 2020 at 2:07 PM EDT
Chuck Pierce’s son was concerned, like a lot of other people looking out on a world of ransacked grocery stores and canceled sports seasons and eerie lines of people standing six feet apart from one another. So he asked his dad: “Is this the end of the world?”

That’s a question you can ask when you have a dad who calls himself an apostolic prophet and leads a prophetic ministry. “No,” said Pierce, who is based in Corinth, Tex. “The Lord’s shown me through 2026, so I know this isn’t the end of time.”

The worldwide upheaval caused by the fast-spreading novel coronavirus pandemic has many people reaching for their Bibles, and some starting to wonder: Could this be a sign of the apocalypse?

It sure might feel apocalyptic. But not if you ask Christian writers and pastors who have spent years focusing their message on the Book of Revelation — the New Testament’s final book. It lays out a lurid, poetic vision of the End Times, in which many evangelical leaders interpret it to mean that Jesus will return to Earth, believers will be raptured to heaven and those left behind will suffer seven dreadful years of calamities. Most of these Revelation-focused prophesiers don’t see coronavirus as heralding the Second Coming and the end of life on Earth as we know it.

Iran tensions could fulfill prophecies about the end of the world, some religious teachers say

“If a person were just completely ignorant about what the Bible says about the End Times, they may think this right now: This is it,” said Jeff Kinley, a writer of books on biblical prophecy who lives in Harrison, Ark.

Kinley said he understands why Americans might see this time of fast-encroaching disease, isolation from loved ones and crashing stock markets as apocalyptic. Americans are primed to believe the end of the world might arrive any day now. In 2010, 41 percent told Pew Research Center that they expected Jesus to return by 2050.

Kinley pointed to Revelation 6:8, which forecasts deaths all over the globe “by sword, famine and plague,” and Jesus’ words about the events before the end times in Luke 21:11: “There will be great earthquakes, famines and pestilences in various places, and fearful events and great signs from heaven.”

“I think he’s referring to a future time,” Kinley said. “I don’t think this is an actual fulfillment of that.”

The Bible is very specific about what will happen before the End Times, Kinley says, and those events haven’t all unfolded yet. For one major thing, the ancient temple in Jerusalem is supposed to be rebuilt first.

Half of evangelicals support Israel because they believe it is important for fulfilling biblical End-Times prophecy

Gary Ray, a writer for the prophecy website Unsealed, agreed: He and his fellow evangelical End-Times writers are focused on what is happening with holy sites in Israel, not disease. “The key focus that we have in our minds is Israel. That’s God’s prophetic clock. As things progress in that country, we get closer to when the rapture of the church will occur, and then the tribulation,” he said.

Ray, who lives near Dallas, pointed out that there have been many pandemics in world history, and none of them have been a token of an approaching apocalypse. But this one might be different, he acknowledged — because of an astrological event in 2017 that Ray read as fulfilling a prophecy in Revelation. “Jesus said there would be pestilences and great signs in the heavens. And sure enough, both of those things are happening together.”

In Ray’s opinion, these portents should send non-Christians rushing toward the Bible, so they can convert while there is still time before the Christians are raptured and everyone else has to endure the wretched seven years. “God is a very gracious god,” he said. “He wants the most possible people to be saved. He’s giving sign after sign after sign, and they’re very clear.”

Michael Brown, host of the Christian radio show “The Line of Fire,” based in Charlotte, also said coronavirus is not a sign of the End Times, but a good opportunity for reflection on what he believes will come. “I see this as a trial run to see how we respond to calamity and hardship,” he said. “If we’re shaken now, how are we going to react when it really gets wild?”

One reason for all these relatively rosy assessments from people who might otherwise be doomsday prophesiers? It might be President Trump’s attitude toward the virus; the president, who is very popular among evangelical Christians, for weeks played down the seriousness of the disease threat. His tone, however, grew markedly more concerned this week.

‘Something that we have tremendous control over’: A timeline of Trump playing down the coronavirus threat

James Beverley, a professor at Tyndale Seminary in Toronto, said he found in researching his forthcoming book on Trump and Christian prophecy that charismatic and Pentecostal prophets, who normally think the End Times are near, have been less likely to forecast doom during the Trump administration.

“Some are saying that Satan is the source of evils like the virus, but the doom and gloom message is missing. There is such a positive view on Trump and such strong wishes for his reelection that there is deep hope that the virus will die out, a strong economy will return and Trump will defeat the Democratic nominee,” Beverley wrote in an email. “It is stunning how optimistic charismatic prophets are since Trump won in 2016.”

Read more:

At D.C.’s churches that stayed open Sunday, a mixture of defiance, encouragement and faith

The Georgetown church at the center of D.C.’s coronavirus quarantines

N.Y. attorney general to televangelist Jim Bakker: Stop peddling fake coronavirus cure

0 Comments
Julie Zauzmer
Julie Zauzmer covers D.C. politics. She has worked at the Post since 2013, including four years covering religion in America.Follow
Sarah Pulliam Bailey
Sarah Pulliam Bailey is a religion reporter, covering how faith intersects with politics and culture. She runs The Washington Post’s religion vertical. Before joining The Post, she was a national correspondent for Religion News Service.Follow
Most ReadReligion
1
Disgraced West Virginia bishop Michael Bransfield was told a year ago to make restitution. His successor says Bransfield has gone incommunicado.
2
Trump said Biden ‘hurt God.’ Biden has spent his life drawing from his Catholic faith.
3
This is not the end of the world, according to Christians who study the end of the world
4
Jerry Falwell Jr., a prominent evangelical supporter of Trump, on indefinite leave of absence from Liberty U.
5
Is Judaism an ethnicity? A race? A nationality? Trump signs an order and provokes an identity crisis.
washingtonpost.com
© 1996-2020 The Washington Post
Contact the Newsroom
Contact Customer Care
Request a Correction
Send a News Tip
Download the Washington Post App
Policies & Standards
Terms of Service
Privacy Policy
Print Products Terms of Sale
Digital Products Terms of Sale
Submissions & Discussion Policy
RSS Terms of Service
Ad Choices
CA Notice of Collection
Do Not Sell My Info


..https://en.m.wikipedia.org/wiki/Thermoelectric_generator#:~:text=A%20thermoelectric%20generator%20(TEG)%2C,a%20form%20of%20thermoelectric%20effect).

A thermoelectric generator (TEG), also called a Seebeck generator, is a solid state device that converts heat flux (temperature differences) directly into electrical energy through a phenomenon called the Seebeck effect (a form of thermoelectric effect). Thermoelectric generators function like heat engines, but are less bulky and have no moving parts. However, TEGs are typically more expensive and less efficient.[1]

Thermoelectric generators could be used in power plants to convert waste heat into additional electrical power and in automobiles as automotive thermoelectric generators (ATGs) to increase fuel efficiency. Radioisotope thermoelectric generators use radioisotopes to generate the required heat difference to power space probes.[1]

History Edit
In 1821, Thomas Johann Seebeck rediscovered that a thermal gradient formed between two dissimilar conductors can produce electricity.[2][3] At the heart of the thermoelectric effect is the fact that a temperature gradient in a conducting material results in heat flow; this results in the diffusion of charge carriers. The flow of charge carriers between the hot and cold regions in turn creates a voltage difference. In 1834, Jean Charles Athanase Peltier discovered the reverse effect, that running an electric current through the junction of two dissimilar conductors could, depending on the direction of the current, cause it to act as a heater or cooler.[4]

Construction Edit

Seebeck effect in a thermopile made from iron and copper wires
Thermoelectric power generators consist of three major components: thermoelectric materials, thermoelectric modules and thermoelectric systems that interface with the heat source.[5]

Thermoelectric materials Edit
Main article: Thermoelectric materials
Thermoelectric materials generate power directly from the heat by converting temperature differences into electric voltage. These materials must have both high electrical conductivity (σ) and low thermal conductivity (κ) to be good thermoelectric materials. Having low thermal conductivity ensures that when one side is made hot, the other side stays cold, which helps to generate a large voltage while in a temperature gradient. The measure of the magnitude of electrons flow in response to a temperature difference across that material is given by the Seebeck coefficient (S). The efficiency of a given material to produce a thermoelectric power is governed by its “figure of merit” zT = S2σT/κ.

For many years, the main three semiconductors known to have both low thermal conductivity and high power factor were bismuth telluride (Bi2Te3), lead telluride (PbTe), and silicon germanium (SiGe). These materials have very rare elements which make them very expensive compounds.[citation needed]

Today, the thermal conductivity of semiconductors can be lowered without affecting their high electrical properties using nanotechnology. This can be achieved by creating nanoscale features such as particles, wires or interfaces in bulk semiconductor materials. However, the manufacturing processes of nano-materials are still challenging.

A thermoelectric circuit composed of materials of different Seebeck coefficient (p-doped and n-doped semiconductors), configured as a thermoelectric generator.
Thermoelectric advantages Edit
Thermoelectric generators are all-solid-state devices that do not require any fluids for fuel or cooling, making them non-orientation dependent allowing for use in zero-gravity or deep-sea applications.[6] The solid-state design allows for operation in severe environments. Thermoelectric generators have no moving parts which produce a more reliable device that does not require maintenance for long periods. The durability and environmental stability have made thermoelectrics a favorite for NASA’s deep space explorers among other applications.[7] One of the key advantages of thermoelectric generators outside of such specialized applications is that they can potentially be integrated into existing technologies to boost efficiency and reduce environmental impact by producing usable power from waste heat.[8]

Thermoelectric module Edit
A thermoelectric module is a circuit containing thermoelectric materials which generate electricity from heat directly. A thermoelectric module consists of two dissimilar thermoelectric materials joined at their ends: an n-type (with negative charge carriers), and a p-type (with positive charge carriers) semiconductor. Direct electric current will flow in the circuit when there is a temperature difference between the ends of the materials. Generally, the current magnitude is directly proportional to the temperature difference:

{\displaystyle \mathbf {J} =-\sigma S\nabla T}

where {\displaystyle \sigma } is the local conductivity, S is the Seebeck coefficient (also known as thermopower), a property of the local material, and {\displaystyle \nabla T} is the temperature gradient.

In application, thermoelectric modules in power generation work in very tough mechanical and thermal conditions. Because they operate in a very high-temperature gradient, the modules are subject to large thermally induced stresses and strains for long periods. They also are subject to mechanical fatigue caused by a large number of thermal cycles.

Thus, the junctions and materials must be selected so that they survive these tough mechanical and thermal conditions. Also, the module must be designed such that the two thermoelectric materials are thermally in parallel, but electrically in series. The efficiency of a thermoelectric module is greatly affected by the geometry of its design.

Thermoelectric systems Edit
Using thermoelectric modules, a thermoelectric system generates power by taking in heat from a source such as a hot exhaust flue. To operate, the system needs a large temperature gradient, which is not easy in real-world applications. The cold side must be cooled by air or water. Heat exchangers are used on both sides of the modules to supply this heating and cooling.

There are many challenges in designing a reliable TEG system that operates at high temperatures. Achieving high efficiency in the system requires extensive engineering design to balance between the heat flow through the modules and maximizing the temperature gradient across them. To do this, designing heat exchanger technologies in the system is one of the most important aspects of TEG engineering. In addition, the system requires to minimize the thermal losses due to the interfaces between materials at several places. Another challenging constraint is avoiding large pressure drops between the heating and cooling sources.

If AC power is required (such as for powering equipment designed to run from AC mains power), the DC power from the TE modules must be passed through an inverter, which lowers efficiency and adds to the cost and complexity of the system.

Materials for TEG Edit
Only a few known materials to date are identified as thermoelectric materials. Most thermoelectric materials today have a zT, the figure of merit, value of around 1, such as in bismuth telluride (Bi2Te3) at room temperature and lead telluride (PbTe) at 500–700 K. However, in order to be competitive with other power generation systems, TEG materials should have a set[when defined as?] of 2–3. Most research in thermoelectric materials has focused on increasing the Seebeck coefficient (S) and reducing the thermal conductivity, especially by manipulating the nanostructure of the thermoelectric materials. Because both the thermal and electrical conductivity correlate with the charge carriers, new means must be introduced in order to conciliate the contradiction between high electrical conductivity and low thermal conductivity, as is needed.[9]

When selecting materials for thermoelectric generation, a number of other factors need to be considered. During operation, ideally, the thermoelectric generator has a large temperature gradient across it. Thermal expansion will then introduce stress in the device which may cause fracture of the thermoelectric legs or separation from the coupling material. The mechanical properties of the materials must be considered and the coefficient of thermal expansion of the n and p-type material must be matched reasonably well. In segmented[when defined as?] thermoelectric generators, the material’s compatibility must also be considered.[why?]

A material’s compatibility factor is defined as

{\displaystyle s={\frac {{\sqrt {1-zT}}-1}{ST}}}.[10]

When the compatibility factor from one segment to the next differs by more than a factor of about two, the device will not operate efficiently. The material parameters determining s (as well as zT) are temperature-dependent, so the compatibility factor may change from the hot side to the cold side of the device, even in one segment. This behavior is referred to as self-compatibility and may become important in devices designed for low-temperature operation.

In general, thermoelectric materials can be categorized into conventional and new materials:

Conventional materials Edit
Many TEG materials are employed in commercial applications today. These materials can be divided into three groups based on the temperature range of operation:

Low temperature materials (up to around 450 K): Alloys based on bismuth (Bi) in combinations with antimony (Sb), tellurium (Te) or selenium (Se).
Intermediate temperature (up to 850 K): such as materials based on alloys of lead (Pb)
Highest temperatures material (up to 1300 K): materials fabricated from silicon-germanium (SiGe) alloys.[11]
Although these materials still remain the cornerstone for commercial and practical applications in thermoelectric power generation, significant advances have been made in synthesizing new materials and fabricating material structures with improved thermoelectric performance. Recent research has focused on improving the material’s figure-of-merit (zT), and hence the conversion efficiency, by reducing the lattice thermal conductivity.[9]

New materials Edit

Generation of electricity by grabbing both sides of a flexible PEDOT:PSS thermoelectric device

PEDOT:PSS-based model embedded into a glove to generate electricity by body heat
Researchers are trying to develop new thermoelectric materials for power generation by improving the figure-of-merit zT. One example of these materials is the semiconductor compound ß-Zn4Sb3, which possesses an exceptionally low thermal conductivity and exhibits a maximum zT of 1.3 at a temperature of 670K. This material is also relatively inexpensive and stable up to this temperature in a vacuum, and can be a good alternative in the temperature range between materials based on Bi2Te3 and PbTe.[9] Among the most exciting developments in thermoelectric materials was the development of single crystal tin selenide which produced a record zT of 2.6 in one direction.[12] Other new materials of interest include Skutterudites, Tetrahedrites, and rattling ions crystals.[citation needed]

Besides improving the figure-of-merit, there is increasing focus to develop new materials by increasing the electrical power output, decreasing cost and developing environmentally friendly materials. For example, when the fuel cost is low or almost free, such as in waste heat recovery, then the cost per watt is only determined by the power per unit area and the operating period. As a result, it has initiated a search for materials with high power output rather than conversion efficiency. For example, the rare earth compounds YbAl3 has a low figure-of-merit, but it has a power output of at least double that of any other material, and can operate over the temperature range of a waste heat source.[9]

Novel processing Edit
To increase the figure of merit (zT), a material’s thermal conductivity should be minimized while its electrical conductivity and Seebeck coefficient is maximized. In most cases, methods to increase or decrease one property result in the same effect on other properties due to their interdependence. A novel processing technique exploits the scattering of different phonon frequencies to selectively reduce lattice thermal conductivity without the typical negative effects on electrical conductivity from the simultaneous increased scattering of electrons.[13] In a bismuth antimony tellurium ternary system, liquid-phase sintering is used to produce low-energy semicoherent grain boundaries, which do not have a significant scattering effect on electrons.[14] The breakthrough is then applying a pressure to the liquid in the sintering process, which creates a transient flow of the Te rich liquid and facilitates the formation of dislocations that greatly reduce the lattice conductivity.[14] The ability to selectively decrease the lattice conductivity results in reported zT value of 1.86, which is a significant improvement over the current commercial thermoelectric generators with zT ~ 0.3–0.6.[15] These improvements highlight the fact that in addition to the development of novel materials for thermoelectric applications, using different processing techniques to design microstructure is a viable and worthwhile effort. In fact, it often makes sense to work to optimize both composition and microstructure.[16]

Efficiency Edit
The typical efficiency of TEGs is around 5–8%. Older devices used bimetallic junctions and were bulky. More recent devices use highly doped semiconductors made from bismuth telluride (Bi2Te3), lead telluride (PbTe),[17] calcium manganese oxide (Ca2Mn3O8),[18][19] or combinations thereof,[20] depending on temperature. These are solid-state devices and unlike dynamos have no moving parts, with the occasional exception of a fan or pump.

Uses Edit
Thermoelectric generators have a variety of applications. Frequently, thermoelectric generators are used for low power remote applications or where bulkier but more efficient heat engines such as Stirling engines would not be possible. Unlike heat engines, the solid state electrical components typically used to perform thermal to electric energy conversion have no moving parts. The thermal to electric energy conversion can be performed using components that require no maintenance, have inherently high reliability, and can be used to construct generators with long service-free lifetimes. This makes thermoelectric generators well suited for equipment with low to modest power needs in remote uninhabited or inaccessible locations such as mountaintops, the vacuum of space, or the deep ocean.

Common application is the use of thermoelectric generators on gas pipelines. For example, for cathodic protection, radio communication, and another telemetry. On gas pipelines for power consumption of up to 5 kW thermal generators are preferable to other power sources. The manufacturers of generators for gas pipelines are Gentherm Global Power Technologies (Formerly Global Thermoelectric), (Calgary, Canada) and TELGEN (Russia).
Thermoelectric Generators are primarily used as remote and off-grid power generators for unmanned sites. They are the most reliable power generator in such situations as they do not have moving parts (thus virtually maintenance-free), work day and night, perform under all weather conditions and can work without battery backup. Although Solar Photovoltaic systems are also implemented in remote sites, Solar PV may not be a suitable solution where solar radiation is low, i.e. areas at higher latitudes with snow or no sunshine, areas with lots of cloud or tree canopy cover, dusty deserts, forests, etc.
Gentherm Global Power Technologies (GPT) formerly known as Global Thermoelectric (Canada) has Hybrid Solar-TEG solutions where the Thermoelectric Generator backs up the Solar-PV, such that if the Solar panel is down and the backup battery backup goes into deep discharge then a sensor starts the TEG as a backup power source until the Solar is up again. The TEG heat can be produced by a low-pressure flame fueled by Propane or Natural Gas.
Many space probes, including the Mars Curiosity rover, generate electricity using a radioisotope thermoelectric generator whose heat source is a radioactive element.
Cars and other automobiles produce waste heat (in the exhaust and the cooling agents). Harvesting that heat energy, using a thermoelectric generator, can increase the fuel efficiency of the car. Thermoelectric generators have been investigated to replace the alternators in cars demonstrating a 3.45% reduction in fuel consumption representing billions of dollars in savings annually.[21] Projections for future improvements are up to a 10% increase in mileage for hybrid vehicles.[22] It has been stated that the potential energy savings could be higher for gasoline engines rather than for diesel engines.[23] For more details, see the article: Automotive thermoelectric generator.
In addition to automobiles, waste heat is also generated in many other places, such as in industrial processes and heating (wood stoves, outdoor boilers, cooking, oil and gas fields, pipelines, and remote communication towers).
Microprocessors generate waste heat. Researchers have considered whether some of that energy could be recycled.[24] (However, see below for problems that can arise.)
Solar cells use only the high-frequency part of the radiation, while the low-frequency heat energy is wasted. Several patents about the use of thermoelectric devices in tandem with solar cells have been filed.[25] The idea is to increase the efficiency of the combined solar/thermoelectric system to convert solar radiation into useful electricity.
Thermoelectric generators have also been investigated as standalone solar-thermal cells. Integration of thermoelectric generators have been directly integrated to a solar thermal cell with efficiency of 4.6%.[26]
The Maritime Applied Physics Corporation in Baltimore, Maryland is developing a thermoelectric generator to produce electric power on the deep-ocean offshore seabed using the temperature difference between cold seawater and hot fluids released by hydrothermal vents, hot seeps, or from drilled geothermal wells. A high-reliability source of seafloor electric power is needed for ocean observatories and sensors used in the geological, environmental, and ocean sciences, by seafloor mineral and energy resource developers, and by the military. Recent studies have found that deep-sea thermoelectric generators for large scale energy plants are also economically viable.[27]
Ann Makosinski from British Columbia, Canada has developed several devices using Peltier tiles to harvest heat (from a human hand,[28] the forehead, and hot beverage[29]) that claims to generate enough electricity to power an LED light or charge a mobile device, although the inventor admits that the brightness of the LED light is not competitive with those on the market.[30]
Practical limitations
Future market
See also
References
External links
Last edited 12 days ago by David Eppstein
RELATED ARTICLES
Thermoelectric cooling
uses the Peltier effect to create a heat flux between the junction of two different types of materials

Thermoelectric materials
Materials whose temperature variance leads to voltage change

Automotive thermoelectric generator

Content is available under CC BY-SA 3.0 unless otherwise noted.
Privacy policyTerms of UseDesktop

thermoelectric generator (TEG), also called a Seebeck generator, is a solid state device that converts heat flux (temperature differences) directly into electrical energy through a phenomenon called the Seebeck effect (a form of thermoelectric effect).